Ricoh MT-C1 User Manual

SERVICE PROGRAM MODE TABLES 15 February 2006
5-140
Not logged. Returns SC724, SC740, SC741
134 Finisher 134. Folder Plate Jam
When the status of the folder plate HP sensor does not change at the precise
time during folder plate motor rotation. Returns SC739
135 Finisher 135. Feed Out Belt Motor
When the status of the feed out belt HP sensor does not change at the precise
time during feed out belt motor rotation. Returns SC725
136 Finisher 136. Punch Hole Motor
When the status of the punch HP sensor does not change at the precise time
during punch hole motor rotation. Returns SC729
7504 Finisher (B478/B706)
141 Finisher 141. Entrance Sensor
When the paper fails to activate the entrance sensor at the precise time or remains
at the entrance sensor for longer than the prescribed time.
142 Finisher 142. Proof Tray Exit Sensor
When the paper fails to activate the proof tray exit sensor at the precise time after
activating the entrance sensor or remains at the proof tray exit sensor for longer
than the prescribed time.
143 Finisher 143. Exit Sensor
When the paper fails to activate the exit sensor at the precise time after activating
the entrance sensor or remains at the exit sensor for longer than the prescribed
time.
144 Finisher 144. Staple Entrance Sensor
When the paper fails to activate the staple entrance sensor at the precise time
after activating the entrance sensor or remains at the staple entrance sensor for
longer than the prescribed time.
145 Finisher 145. Exit Sensor after jogging
When the paper from jogger unit fails to activate the exit sensor at the precise time
or remains at the exit sensor for longer than the prescribed time.
148 Finisher 148. Upper Transport Motor
When the upper transport motor fails to send any signals while rotating.
149 Finisher 149. Shift Motor
When the status of the lower tray encoder sensor does not change at the precise
time during shift motor rotation. Returns SC733
150 Finisher 150. Jogger Fence Motor
When the status of the jogger fence HP sensor does not change at the precise
time during jogger fence motor rotation. Returns SC722
151 Finisher 151. Shift Roller or Guide Plate Motor
When the status of the shift roller HP sensor does not change at the precise time
during shift roller motor rotation, or the status of the guide plate position sensor
does not change at the precise time during guide plate motor rotation. Returns
SC732, SC736
153 Finisher 153. Stapler Unit
When the stapler unit fails to send any signals while stapling. Returns SC724

Ricoh MT-C1 Specifications

General

Brand	Ricoh
Model	MT-C1
Category	All in One Printer
Language	English