15 February 2006 SERVICE PROGRAM MODE TABLES
5-153
Service
Tables
T:FIN Jobs [0~9999999/1] 8061
These SPs total the finishing methods. The finishing method is specified by the
application.
C:FIN Jobs [0~9999999/1] 8062
These SPs total finishing methods for copy jobs only. The finishing method is
specified by the application.
P:FIN Jobs [0~9999999/1] 8064
These SPs total finishing methods for print jobs only. The finishing method is
specified by the application.
S:FIN Jobs [0~9999999/1] 8065
These SPs total finishing methods for scan jobs only. The finishing method is
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs [0~9999999/1] 8066
These SPs total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
O:FIN Jobs [0~9999999/1] 8067
These SPs total finishing methods for jobs executed by an external application,
over the network. The finishing method is specified by the application.
001 Sort Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8066)
002 Stack Number of jobs started out of Sort mode.
003 Staple Number of jobs started in Staple mode.
004 Booklet Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
005 Z-Fold Number of jobs started In any mode other than the Booklet mode
and set for folding (Z-fold).
006 Punch Number of jobs started in Punch mode. When Punch is set for a
print job, the P: counter increments. (See SP8064)
007 Other Reserved. Not used.
To Next Page
Loading...
