EasyManua.ls Logo

Ricoh MT-C1 - Page 631

Ricoh MT-C1
865 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE PROGRAM MODE TABLES 15 February 2006
5-158
ADF Org Feeds [0~9999999/1] 8221
These SPs count the number of pages fed through the ADF for front and back
side scanning.
001 Front Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front
side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front
side count is the same as the number of pages fed for duplex front
side scanning. (The front side is determined by which side the user
loads face up.)
002 Back Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex rear-side
scanning.
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet
is output.
Scan PGS/Mode [0~9999999/1] 8231
These SPs count the number of pages scanned by each ADF mode to determine
the work load on the ADF.
001 Large Volume Selectable. Large copy jobs that cannot be loaded in
the ADF at one time.
002 SADF Selectable. Feeding pages one by one through the
ADF.
003 Mixed Size Selectable. Select “Mixed Sizes” on the operation
panel.
004 Custom Size Selectable. Originals of non-standard size.
005 Platen Book mode. Raising the ADF and placing the
original directly on the platen.
If the scan mode is changed during the job, for example, if the user switches
from ADF to Platen mode, the count is done for the last selected mode.
If the user selects “Mixed Sizes” for copying in the platen mode, the Mixed Size
count is enabled.
In the SADF mode if the user copies 1 page in platen mode and then copies 2
pages with SADF, the Platen count is 1 and the SADF count is 3.

Table of Contents

Related product manuals