Ricoh MT-C1 - Page 655

SERVICE PROGRAM MODE TABLES 15 February 2006
5-182
Photo Mode
001 Main Scan MTF Level Sets the MTF coefficient for the main scan
direction.
[0x00~0xFF/0x01]
002 Sub Scan MTF Level Sets the MTF coefficient for the sub scan
direction.
[0x00~0xFF/0x01]
003 Main Scan MTF Strength Sets the MTF strength for the main scan
direction.
[0~0x07/0x01]
004 Sub Scan MTF Strength Sets the MTF strength for the sub scan
direction.
[0~0x07/0x01]
005 Smoothing Level Sets the smoothing coefficient.
[0~0x07/0x01]
006 Gamma Selection Selects the gamma setting.
[0x00~0x06/0x01]
0:Normal
1:Smooth
2:Distinct
3:Sharp
4:Text
5:Photo.
007 Dither Pattern [0x01/0x0x]
008 Density Level 7 Light:
Brightness
The following SPs adjust the image density
(brightness, contrast, and thresholds) for each
image density level (from 7 to 1) for Photo
mode when using the delivery scanner mode.
The settings are reflected in the gamma table.
[1~255/1]
009 Density Level 7 Light:
Contrast
[1~255/1]
010 Density Level 7 Light:
Threshold
[1~255/1]
011 Density Level 6:
Brightness
[1~255/1]
012 Density Level 6:
Contrast
[1~255/1]
013 Density Level 6:
Threshold
[1~255/1]
014 Density Level 5:
Brightness
[1~255/1]
015 Density Level 5:
Contrast
[1~255/1]
016 Density Level 5:
Threshold
[1~255/1]
017 Density Level 4
Intermediate: Brightness
[1~255/1]
2004
018 Density Level 4
Intermediate: Contrast
[1~255/1]