Operation
Right joystick
Joystick movements - multi-key (11) NOT pressed
Only the two rotary drives turn! The rotating direction of the swivel arm always
depends on the selected loading direction!
Joystick FORWARD Turn swivel arm
Joystick BACKWARD Turn swivel arm
Joystick LEFT Turn truck conveyor to the left
Joystick RIGHT Turn truck conveyor to the right
Joystick movements - multi-key (11) PRESSED and HELD
This lifts and lowers the truck conveyor or articulated part!
Joystick FORWARD Lower truck conveyor
Joystick BACKWARD Raise truck conveyor
Joystick LEFT Fold in truck conveyor articulated part
Joystick RIGHT Fold out truck conveyor articulated part
Mini joystick (1)
FORWARD Lowering pickup
BACKWARD Raising pickup
LEFT Swivel counterweight arm to the right
RIGHT Swivel counterweight arm to the left
Before swivelling the counterweight arm, it must be unlocked via the R-Select and by
pressing the key +. Always swivel the counterweight arm in the direction opposite to
the truck conveyor!
Key (2) Traction drive forward
Pressing this key only switches the traction drive forward in "Turtle" operating mode.
Pressing this key again stops the traction drive.
Key (3) Traction drive backward
Press this key to switch the traction drive in reverse for as long as you hold the key
down, only in the "Turtle" operating mode. If the machine is driving forward during
loading, then you stop forward movement by pressing this key.
158 / 546
To Next Page
Loading...