Operating Components
Driver's seat
Longitudinal adjustment with operat-
ing console
Moving the locking lever upward releases
lateral adjustment.
The locking lever must latch into the
desired position. It should not be possi-
ble to move the driver’s seat into another
position when it is locked.
Headrest
The headrest can be individually adjusted
for height by pulling it upward over the
various increments up the end stop.
By pushing forward or backward the
angle of the headrest can be adjusted
individually.
To remove the headrest, pull it over the
end stop.
Lumbar support
Pressing the top and bottom switch
adjusts the lumbar support in the top and
bottom area of the seatback cushion.
This increases both the seating comfort
and the performance of the driver.
The lumbar support is adjusted outwards
by pressing + and inwards by pressing -
on the switch.
If the seatback cushion no longer moves
when + is pressed on the switch, the
maximum position has been reached and
the switch must be released.
76 / 546
To Next Page
Loading...