SATO CT4-LX User Manual

133
• When closing the top cover, be careful not to pinch your fingers.
• When the Label Waste Prevention function is enabled, an error occurs if the leading
edge of the media extends too far from the media discharge outlet. Align the leading
edge of the media with the media discharge outlet.
10. Align the media to the print start position, and switch to Online mode.
If the icon appears on the screen, the Label Waste Prevention function is enabled. Tap
[ONLINE] to have the media position adjusted automatically when switching to Online mode.
If the icon does not appear on the screen, the Label Waste Prevention function is disabled. Tap
[FEED] to feed media, and then tap [ONLINE].

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz