SATO CT4-LX User Manual

141
13.
Adjust the print speed and the print darkness, and then tap or slide the screen
to the left.
14.
For the RFID models, tap the RFID tag format to use, and then tap or slide the
screen to the left.
• If an RFID tag format is not registered, only [None Specified] is displayed. You can
register RFID tag formats from the [Interface] > [RFID] > [RFID Tag Model] > [Edit]
menu.
15. Confirm the settings, and then tap [Apply].

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz