SATO CT4-LX User Manual

Conditions That Trigger Paper End
158
• When the Amount of Printing Remaining Is More Than the Amount of Media Remaining
If the amount of printing remaining is more than the amount of media remaining when a paper
end error is detected, the product cannot finish the print job. Printing stops immediately and a
paper end error occurs.
(1) Print head position
(2) Paper end sensor
(3) Amount of media remaining
(4) Amount of printing remaining
• When the Amount of Printing Remaining Is Less Than the Amount of Media Remaining
If the amount of printing remaining is less than the amount of media remaining, the product will
finish the print job and a paper end error will occur.
(1) Print head position
(2) Paper end sensor
(3) Amount of media remaining
(4) Amount of printing remaining

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz