[Network]
184
•
After finishing the settings, tap . After a message asking you whether to save the
settings appears, tap .
•
Tap to discard the changes. Tap on the message to confirm you want to
discard the changes.
• You cannot change [IP Address], [Netmask], [Gateway], or [DNS] if [Mode] is [DHCP].
The setting items are as follows:
[Mode]
Select the IP address assignment method.
The options are as follows:
DHCP
Automatically retrieve the IP address, subnet mask address, default gateway address, and DNS
server address from the DHCP server.
Static
Manually set the IP address, subnet mask address, default gateway address, and DNS server
address.
[DHCP]
Update the lease time and get the IP address from the DHCP server again.
Available only if you have selected [DHCP] in the [Mode] menu.
[IP Address]
Set and check the IP address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the IP address you received from
the DHCP server.
If you have selected [Static] in the [Mode] menu, set the IP address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
[Netmask]
Set and check the subnet mask address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the subnet mask address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the subnet mask address.
You can set each group of the address from among 0, 128, 192, 224, 240, 248, 252, 254 and 255.
The setting range is as follows:
128.000.000.000 to 255.255.255.254
To Next Page
Loading...
Need help?
General
