EasyManuals Logo

SATO CT4-LX User Manual

SATO CT4-LX
564 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
185
[Gateway]
Set and check the default gateway address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you received
from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• The gateway address set here is shared with the settings in [Wi-Fi] > [Wi-Fi Setting] >
[IPv4 (Wi-Fi)].
[DNS]
Set and check DNS server addresses.
If you have selected [DHCP] in the [Mode] menu, the screen shows the DNS server address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the address of the DNS server.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• You can register up to three IP addresses for the DNS server. Use a comma to delimit
different IP addresses.
• The DNS server address set here is shared with the settings in [Wi-Fi] > [Wi-Fi Setting]
> [IPv4 (Wi-Fi)].
[IPv6 (LAN)]
Set the IPv6 for the LAN.
•
After finishing the settings, tap . After a message asking you whether to save the
settings appears, tap .
•
Tap to discard the changes. Tap on the message to confirm you want to
discard the changes.
• You cannot change [IP Address], [Prefix Length], [Gateway], or [DNS] if [Mode] is
anything other than [Static].
The setting items are as follows:
[Mode]
Select the IP address assignment method or disable IPv6.
The options are as follows:
Disable
Disable IPv6.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CT4-LX and is the answer not in the manual?

SATO CT4-LX Specifications

General IconGeneral
Print MethodThermal Transfer / Direct Thermal
Print Resolution203 dpi
Max Print Width4.09 inches (104 mm)
Media TypeRoll, Fan-fold
Media Thickness0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length984 feet
ConnectivityUSB, Ethernet, Bluetooth
Supported Barcode TypesPDF417, QR Code
Power Requirements100-240 VAC, 50/60 Hz

Related product manuals