EasyManuals Logo

SATO CT4-LX User Manual

SATO CT4-LX
564 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
[Network]
186
Auto
Automatically generate the IP address, prefix length, default gateway address, and DNS server
address (stateless mode).
DHCP
Automatically acquire the IP address, prefix length, default gateway address, and DNS server
address from the DHCP server (stateful mode).
Static
Manually set the IP address, prefix length, default gateway address, and DNS server address.
[DHCP]
Update the lease time and get the IP address from the DHCP server again.
Available only if you have selected [DHCP] in the [Mode] menu.
[IP Address]
Set and check the IP address.
If you have selected [Auto] or [DHCP] in the [Mode] menu, the screen shows the IP address you
acquired.
If you have selected [Static] in the [Mode] menu, set the IP address.
The setting range is as follows:
0:0:0:0:0:0:0:1 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[Prefix Length]
If you have selected [Static] in the [Mode] menu, set the prefix.
The setting range is from 1 to 128.
[Gateway]
Set and check the default gateway address.
If you have selected [Auto] or [DHCP] in the [Mode] menu, the screen shows the gateway address you
acquired.
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
• The gateway address set here is shared with the settings in [Wi-Fi] > [Wi-Fi Setting] >
[IPv6 (Wi-Fi)].
[DNS]
Set and check the address of the primary DNS server.
If you have selected [Auto] or [DHCP] in the [Mode] menu, the screen shows the DNS server address
you acquired.
If you have selected [Static] in the [Mode] menu, set the address of the DNS server.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CT4-LX and is the answer not in the manual?

SATO CT4-LX Specifications

General IconGeneral
Print MethodThermal Transfer / Direct Thermal
Print Resolution203 dpi
Max Print Width4.09 inches (104 mm)
Media TypeRoll, Fan-fold
Media Thickness0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length984 feet
ConnectivityUSB, Ethernet, Bluetooth
Supported Barcode TypesPDF417, QR Code
Power Requirements100-240 VAC, 50/60 Hz

Related product manuals