SATO CT4-LX User Manual

[Network]
202
Cuts
Specifies the number of cut times of the cutter for the timing to perform the periodic notification.
You will be notified for each number of cut times you specify.
The setting range is from 1 to 1,000,000.
Last Update
Shows the number of cut times of the cutter for the last periodic notification.
Next Update
Shows the number of cut times of the cutter for the next periodic notification.
Current Value
Shows the current number of cut times of the cutter.
[Notifications] (SOS users only)
Specifies the number of periodic notifications to be sent per day.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Daily] in the [Type] menu.
The setting range is from 1 to 3.
[Time 1] (SOS users only)
Specifies the time to perform the first periodic notification.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Daily] in the [Type] menu.
[Time 2] (SOS users only)
Specifies the time to perform the second periodic notification.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
set [Daily] in the [Type] menu and have set twice or more in [Notifications].
[Time 3] (SOS users only)
Specifies the time to perform the third periodic notification.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
set [Daily] in the [Type] menu and have set three times in [Notifications].
[Weekday] (SOS users only)
Specifies the day of the week to perform the periodic notification.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Weekly] in the [Type] menu.
The setting range is from Sunday to Saturday.
[Day] (SOS users only)
Sets the date to perform the periodic notification.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Monthly] in the [Type] menu.
The setting range is from 1 to 28.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz