213
EPC and TID
Store the EPC and TID data.
EPC
Store the EPC data.
TID
Store the TID data.
[Counters]
Shows the RFID counter.
RFID writing operations by the following commands are counted.
• RFID write: EPC code write <IP0> command
• Tag data print: UID/EPC/IDm print <TU> command
However, writing that is not accompanied by printing and media feeding is not counted.
The setting items are as follows:
[Life]
Shows the number of RFID successes, failures, and total attempts.
The items are as follows:
Count Success
Shows the total number of successful times you have written to an RFID tag.
Count Failure
Shows the total number of RFID write errors.
Count Total
Shows the total number of times you have written to an RFID tag.
This is the total number including [Count Success] and [Count Failure].
[User]
Shows the number of RFID write successes, failures, and total attempts after the RFID counter was
cleared.
The items are as follows:
Count Success
Shows the total number of successful times you have written to an RFID tag after the RFID
counter is cleared.
Count Failure
Shows the total number of RFID write errors after the RFID counter is cleared.
To Next Page
Loading...
Need help?
General
