SATO CT4-LX User Manual

[SDPL]
228
[SOH]
Set the SOH code.
You can change the code only if you have selected [Custom] in the [Code Type] menu.
The setting range is from 0 to FF (hexadecimal).
• Each code must be set to different values.
[STX]
Set the STX code.
You can change the code only if you have selected [Custom] in the [Code Type] menu.
The setting range is from 0 to FF (hexadecimal).
• Each code must be set to different values.
[CR]
Set the CR code.
You can change the code only if you have selected [Custom] in the [Code Type] menu.
The setting range is from 0 to FF (hexadecimal).
• Each code must be set to different values.
[CNTBY]
Set the CNTBY code.
You can change the code only if you have selected [Custom] in the [Code Type] menu.
The setting range is from 0 to FF (hexadecimal).
• Each code must be set to different values.
[Label Rotation]
Set the page orientation for label printing.
The label size set in the product is used as a reference of rotation.
The options are as follows:
0 degree
Labels are printed in portrait orientation.
90 degree
Labels are printed in landscape orientation.
180 degree
Labels are printed in inverse-portrait orientation.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz