SATO CT4-LX User Manual

229
270 degree
Labels are printed in inverse-landscape orientation.
[SOP Emulation]
Set the SOP emulation.
The options are as follows:
• [Disabled]
• [Prodigy Plus - 110]
• [Allegro - 220]
• [Prodigy - 250]
• [Auto]
[Compatible Mode]
Set the compatible mode for SDPL.
The setting items are as follows:
[TTF]
Enable or disable TrueType font compatible mode.
Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.
Disable TrueType font compatible mode.
[Graphics]
Set whether to allow the registration of graphic data even if a line feed code is omitted.
[Compression]
Set whether to support graphic data created using unique compression formats.
[Right-to-Left print]
Set the Right-to-Left printing function.
The options are as follows:
Disabled
All texts are printed from left to right.
Auto
When an Arabic font is detected, the Arabic text is printed from right to left.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz