SATO CT4-LX User Manual

[Help]
276
[Fanfold]
Shows the video for loading the fan-fold media.
The items are as follows:
Standard
Shows the video for loading the fan-fold media (standard specifications).
Cutter
Shows the video for loading the fan-fold media (cutter specifications).
[Label Waste Prevention]
Shows the video for loading media when the Label Waste Prevention function is enabled.
The items are as follows:
[Use Ribbon]
Shows the video for loading media when the Label Waste Prevention function is enabled for thermal
transfer mode.
The items are as follows:
Standard
Shows the video for loading media when the Label Waste Prevention function is enabled
(standard specifications).
Cutter
Shows the video for loading media when the Label Waste Prevention function is enabled (cutter
specifications).
[Direct Thermal]
Shows the video for loading media when the Label Waste Prevention function is enabled for direct
thermal mode.
The items are as follows:
Standard
Shows the video for loading media when the Label Waste Prevention function is enabled
(standard specifications).
Cutter
Shows the video for loading media when the Label Waste Prevention function is enabled (cutter
specifications).
[Install Ribbon]
Shows the video for loading the ribbon.
[Replace Paper]
Shows the video for replacing the media.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz