297
2. Select [Connect] to search and show the connectable device names or to accept connection
requests when the product is the GO (Group Owner). Tap the device name you want to connect.
3. Select [Start Group] if you want to start a new persistent group or select a group from the list.
4. Select [Remove Group] to remove the persistent group in step 3.
5. Complete the connection according to the display on the product or device you want to connect.
6. Tap [Disconnect] if you want to stop the connection.
• You can connect a maximum of 10 devices.
• When Wi-Fi Direct is active, [Device Name] cannot be changed.
• [Start Group] and [Remove Group] are shown only if the product is not connected to a
Wi-Fi Direct network.
• [Disconnect] is shown only if the product is connected to a Wi-Fi Direct network.
• After setting up a start group, the product will be set to the GO (Group Owner) and will
wait for a connection request from another device.
• If the product is powered off during a persistent group connection, the group will be
started automatically after the product is powered on.
[Wi-Fi Connection Setting]
Set the wireless LAN settings.
The setting items are as follows:
[SSID]
Set the SSID.
The screen shows the Wi-Fi network detected by the product.
Tap the name of the Wi-Fi network you want to connect.
To register a Wi-Fi network manually, tap and enter the name of the network.
You can enter a maximum of 32 characters. Alphabets (capital and small letters), numbers and
symbols can be used.
[Hidden SSID]
Set the hidden SSID (stealth function).
Available only if you have selected [Infrastructure] in the [Mode] menu.
[Mode]
Set the communication method of the wireless LAN.
The options are as follows:
• [Infrastructure]
• [Ad-hoc]
[Channel]
Set the communication channel.
[Channel] can be set only if you have selected [Ad-hoc] in the [Mode] menu.
The number of channels you can set varies depending on the region of the product.
To Next Page
Loading...
Need help?
General
