Parts Identification
32
Rear View
(1) DC input connector
Before connecting, make sure that the AC voltage of your region is in the range of AC 100 to 240
V, 50 to 60 Hz.
(2) USB connector (Type B)
To connect the product to the computer using the USB interface.
(3) USB connector (Type A)
You can use USB memory to get the product log data and setting information, and to install
certificates.
Also, other devices like a barcode scanner or keyboard can be connected.
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
(4) LAN connector
Use to connect the product to a network using the LAN interface.
(5) Media loading port (for fan-fold media)
To Next Page
Loading...
