SATO CT4-LX - Cutter Mode and No Backfeed (When the Top Cover Is Closed, and There Is a Label Above the Label Top Sensor)

363
Cutter Mode and No Backfeed (When the Top Cover Is Closed, and There Is a Label
Above the Label Top Sensor)
• The top of the label (first label) moves in the same way in the following print modes.
◦ Cutter mode and backfeed before printing (when the top cover is closed, and there
is a label above the label top sensor)
◦ Partial cutter mode and no backfeed (when the top cover is closed, and there is a
label above the label top sensor)
◦ Partial cutter mode and backfeed before printing (when the top cover is closed, and
there is a label above the label top sensor)