SATO CT4-LX - Cutter Mode and No Backfeed (When the Top Cover Is Closed, and There Is No Label Above the Label Top Sensor)

364
Cutter Mode and No Backfeed (When the Top Cover Is Closed, and There Is No Label
Above the Label Top Sensor)
• The top of the label (first label) moves in the same way in the following print modes.
◦ Cutter mode and backfeed before printing (when the top cover is closed, and there
is no label above the label top sensor)
◦ Partial cutter mode and no backfeed (when the top cover is closed, and there is no
label above the label top sensor)
◦ Partial cutter mode and backfeed before printing (when the top cover is closed, and
there is no label above the label top sensor)