460
Error Message 1006 (Buffer Overflow)
When there is an error with the product, the error message appears on the screen.
Tap the error number button to show the details screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Tap [CLEAR] or tap [SETTINGS] to adjust the settings.
Cause and Countermeasure Reference
Cause (1)
The size of the received data from the host
exceeds the size of the receive buffer.
Countermeasure (1)
Change the settings on the host so that data
that exceeds the size of the receive buffer
cannot be sent.
-
Cause (2)
The interface settings between the product
and the host are incorrect.
Countermeasure (2)
Set the interface settings of the product and
host again.
Refer to the Printer Driver Manual regarding
the printer driver settings.
RS-232C
Go to your local SATO website
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble
To Next Page
Loading...
