SATO CT4-LX User Manual

497
Error Message 1099 (Config Warning)
When there is an error with the product, the error message appears on the screen.
Tap the error number button to show the details screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Tap [CLEAR].
Cause and Countermeasure Reference
Cause
The power was cut off in an inappropriate
way, such as the power cord was pulled out
while the power was on.
Countermeasure
◦ Power off the product correctly.
◦ Reset the product in the Settings menu.
Powering Off the Product
The SETTINGS Menu
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz