Shimadzu GC-2014 Instruction Manual

1 Installation
1.2 Power supply and wiring
5
GC-2014
The power cable for 115 V model is color-coded as follows.
Black ... Connected to HOT of AC line.
White ... Connected to NEUTRAL of AC line.
Green ... Grounding (GROUND)
Fig. 1.2.2 Power cable
Q Symbol conventions
~ : AC
○ : Off, Open
｜ : On, Close
Q Heating energy generation
The following graph shows the heating values generated by the unit.
Fig. 1.2.3
Black
White
Green
Power cable
ON status
Power switch
OFF status
0
0
0.5
1
1.5
2
2.5
3
3.5
100 200 300 400
Temperature (
)
Heat generation (×10
6
J/hour)

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)