Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.6 GC Configuration
248
GC-2014
16.6.8.5 AUX APC Name Customization
Select “6. GC CONFIGURATION” from the [FUNC] key screen, and then “6. PORT
NAME CUSTOMIZATION”, and finally “3. AUX APC NAME CUSTOMIZ”, to open the
screen shown in Fig. 16.6.18.
16.6.8.6 AUX AMC Name Customization
Select “6. GC CONFIGURATION” from the [FUNC] key screen, and then “6. PORT
NAME CUSTOMIZATION”, and finally “4. AUX AMC NAME CUSTOMIZ”, to open the
screen shown in Fig. 16.6.19.
Fig. 16.6.18 AUX APC name setup screen
Fig. 16.6.19 AUX AMC name setup screen
Only listed APC options can
be named.
To change the names, refer to
“6.3.5 Changing item names”
in “6.3 Basic Key Operations”.
Only listed AMC options can
be named.
To change the names, refer to
“6.3.5 Changing item names”
in “6.3 Basic Key Operations”.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)