Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.6 GC Configuration
254
GC-2014
DAFC UNIT
Selection: DAFC/AMC. LR, Default: DAFC
When using the dual AFC as an AMC for detector makeup gas, set to AMC. LR. If AMC.
LR is set, the injection port connected to the dual AFC becomes off from the flow line
and is not displayed on the flow line configuration screen (8.3.1)
Set the DAFC unit prior to starting GCsolution.
DTCD PREAMPLIFIER
Selection: x1/x10, Default: x1
When it is set to x10, TCD output is amplified ten times.
GC START
Selection: SYSTEM Key Screen/ SET Key Screen/ MONIT Key Screen/,
Default: SYSTEM Key Screen
Select the screen, which is displayed automatically after pressing the "Start GC" key
(PF1 key of the [SYSTEM] key main screen).

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)