Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.9 Key Lock and Parameter Lock
267
GC-2014
Q Setting a password
Select [Password] (PF menu) from the screen shown in Fig. 16.9.4 to display the password
screen shown in Fig. 16.9.5. The password is a number ranging from 1 to 9999. The factory
set password is “2014”.
＜ Setting a password ＞
Enter each requierd password, and press [Set] (PF menu).
Enter the new password twice to confirm it.
If the “Old Password” or “Confirm new password” is incorrect, an error message appears.
Confirm the password to be input, entering it correctly.
Only the system supervisor should have password access. Change the factory-set password promptly.
Do not forget your password, and keep it secure.
Fig. 16.9.5 Password setup screen
NOTE
NOTE

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)