Shimadzu GC-2014 - Page 297

To Next Page

To Previous Page

18 Error Messages

18.1 Error Messages

285

GC-2014

Cooling fan error

The GC cooling fan is out of order. The system cannot perform fully in this condition. Turn off

the system and contact your Shimadzu representative.

Damaged in electronics

A repair is necessary. Contact your Shimadzu representative.

Abnormal PRG current

Electric current in the optional PRG board is abnormal. The system cannot be used in this

condition. Turn off the system and contact your Shimadzu representative.

Flow controller AMC board failure

If the above error messages appear, the hardware has failed. The GC system cannot be

used in this condition. Turn off the system and contact your Shimadzu representative.

Code Message CS

0035 Cooling fan error No

Code Message CS

0036 ROM error No

0037 RAM error No

0038 CPU register error No

Code Message CS

0039 PRG current error Yes

Code Message CS

0040 CAR1 DAFC PCB error No

0041 CAR2 DAFC PCB error No

0042 AMC 1-2 PCB error No

0043 AMC 3-4 PCB error No

0044 AMC 5-6 PCB error No

0045 AMC 7-8 PCB error No

0046 AMC 9-10 PCB error No

0047 CAR1 SAFC PCB error No

0048 CAR2 SAFC PCB error No

Other manuals for Shimadzu GC-2014