Shimadzu GC-2014 Instruction Manual

18 Error Messages
18.1 Error Messages
290
GC-2014
Valve leak errors
Gas is flowing even if the pressure is set at 0 kPa or the flow rate is set at 0 ml/min. If there
is no problem with the gas supply, an AFC/APC value error may have occurred. Turn off the
system and contact your Shimadzu representative.
Code Message CS
2048 CAR1 purge valve leaks Yes
2049 CAR2 purge valve leaks Yes
2050 CAR3 purge valve leaks Yes
2057 DetAPC1 makeup valve leaks Yes
2058 DetAPC1 hydrogen valve leaks Yes
2059 DetAPC1 air valve leaks Yes
2060 DetAPC2 makeup valve leaks Yes
2061 DetAPC2 hydrogen valve leaks Yes
2062 DetAPC2 air valve leaks Yes
2063 DetAPC3 makeup valve leaks Yes
2064 DetAPC3 hydrogen valve leaks Yes
2065 DetAPC3 air valve leaks Yes
2066 DetAPC4 makeup valve leaks Yes
2067 DetAPC4 hydrogen valve leaks Yes
2068 DetAPC4 air valve leaks Yes
2069 APC1 valve leaks Yes
2070 APC2 valve leaks Yes
2071 APC3 valve leaks Yes
2072 APC4 valve leaks Yes
2073 APC5 valve leaks Yes
2074 APC6 valve leaks Yes
2075 APC7 valve leaks Yes
2076 APC8 valve leaks Yes
2077 APC9 valve leaks Yes
2078 APC10 valve leaks Yes
2079 APC11 valve leaks Yes
2080 APC12 valve leaks Yes
2081 APC13 valve leaks Yes
2082 APC14 valve leaks Yes
2083 APC15 valve leaks Yes
2084 APC16 valve leaks Yes
2085 APC17 valve leaks Yes
2086 APC18 valve leaks Yes

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)