Name: Shimadzu GC-2014
Brand: Shimadzu
Rating: 4 (1 reviews)

To Next Page

To Previous Page

18 Error Messages

18.1 Error Messages

291

GC-2014

Abnormal component operation

Verify whether gas is supplied stably at the required pressure. If there is no problem with the

gas supply, the control system, such as the APC, may have failed. Turn off the system and

contact your Shimadzu representative.

Code Message CS

2091 CAR1 purge is out of control Yes

2092 CAR2 purge is out of control Yes

2093 CAR3 purge is out of control Yes

2100 DetAPC1 makeup gas is out of ctrl Yes

2101 DetAPC1 hydrogen is out of control Yes

2102 DetAPC1 air is out of control Yes

2103 DetAPC2 makeup gas is out of ctrl Yes

2104 DetAPC2 hydrogen is out of control Yes

2105 DetAPC2 air is out of control Yes

2106 DetAPC3 makeup gas is out of ctrl Yes

2107 DetAPC3 hydrogen is out of control Yes

2108 DetAPC3 air is out of control Yes

2109 DetAPC4 makeup gas is out of ctrl Yes

2110 DetAPC4 hydrogen is out of control Yes

2111 DetAPC4 air is out of control Yes

2112 APC1 is out of control Yes

2113 APC2 is out of control Yes

2114 APC3 is out of control Yes

2115 APC4 is out of control Yes

2116 APC5 is out of control Yes

2117 APC6 is out of control Yes

2118 APC7 is out of control Yes

2119 APC8 is out of control Yes

2120 APC9 is out of control Yes

2121 APC10 is out of control Yes

2122 APC11 is out of control Yes

2123 APC12 is out of control Yes

2124 APC13 is out of control Yes

2125 APC14 is out of control Yes

2126 APC15 is out of control Yes

2127 APC16 is out of control Yes

2128 APC17 is out of control Yes

2129 APC18 is out of control Yes

Other manuals for Shimadzu GC-2014

Service Manual98 pages

Operation Manual148 pages

Questions and Answers:

Need help?

Do you have a question about the Shimadzu GC-2014 and is the answer not in the manual?

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)