REALTIME RECORDING
The pattern information for a control type pattern can be recorded in realtime using the
control knobs. This allows a more expressive performance to be recorded directly into a
pattern.
To enter RECORD mode, press and hold or double click the RECORD button. In record
mode, the control knobs are used to record control values into the pattern as the pattern
plays.
You can also continue to use grid recording on individual steps while in REALTIME
RECORD mode. To do this, click and hold any pattern step button. The step attributes
can be displayed and edited, when releasing the step button you can return to realtime
recording.
To Next Page
Loading...