SETTING PATTERN TIME SCALE
Patterns can be assigned different timing scales, which changes the “resolution” of the
pattern steps.
This is also useful for setting the speed that a pattern plays back for polyrhythmic
sequencing.
There are eight available timing scales to choose from:
"
The current time scale of the pattern is displayed on the four attribute LEDs, the 4/4 scales
are shown with a brightly lit LED while the triplet version of the scale is displayed with a
dimly lit LED.
each step represents 1/32 note
each step represents 1/16 note (default)
each step represents 1/8 note
each step represents 1/4 note
each step represents 1/32 note triplet
each step represents 1/16 note triplet
each step represents 1/8 note triplet
each step represents 1/4 note triplet
1x setting for 4/4 16th notes
To Next Page
Loading...