CV CONVERTER MODE
Engine has a special mode to act as a dedicated MIDI to CV converter box. This can be
used as 8 monophonic tracks or a single 8-voice polyphonic converter.
It will also convert MIDI clock to DIN Sync in this mode. MIDI input is accepted from
either USB or DIN MIDI.
All incoming MIDI is also echoed thru to both DIN MIDI outputs.
In CV converter mode, there are a few options that can be selected to control the
conversion.
ENABLING CV CONVERTER MODE
To run Engine as a dedicated CV converter box, you must boot Engine while holding
down the UTILITY button.
"
The LED display will show “CONV” to indicate converter mode is active.