Chapter 6: Log Commands
104 Section II: Switch Management
Confirmation Command
“SHOW LOG OUTPUT” on page 109
Example
The following command specifies the IPv4 address of the sysLog server
and log messages with severity level 5 and higher to be sent to the sysLog
server:
Manager > set log output=syslog server=192.168.1.1
severity=>5
5 syslog Messages generated internally by syslogd
6 lpr Line printer subsystem
7 news Network news subsystem
8 uucp UUCP subsystem
9 cron Clock Daemon
10 authpriv Security/authorization messages
11 ftp FTP daemon
12 ntp NTP subsystem
13 audit Log audit
14 alert Log alert
15 cron2 Clock daemon
16 local0 Local use 0
17 local1 Local use 1
18 local2 Local use 2
19 local3 Local use 3
20 local4 Local use 4
21 local5 Local use 5
22 local6 Local use 6
23 local7 Local use 7
Table 12. Syslog Facility (Continued)
Facility
Code
Facility
Keyword
Description
To Next Page
Loading...
