AT-GS900M Series CLI Reference
Section II: Switch Management 103
The severity levels are explained in Table 10.
The severity parameter examples are listed in Table 11.
The sysLog facility values are listed in Table 12.
Table 10. Severity Level
Severity Level Severity
7Critical
6 Urgent
5 Important
4Notice
3 Information
2 Detail
1Trivial
0 Debug
Table 11. Operator Example
Symbol Example Description
< severity=<5 Log messages with severity level 5 and less
are sent to the specified output.
> severity=>5 Log messages with severity level 5 and
greater are sent to the specified output.
! severity=!5 All log messages except severity level 5 are
sent to the specified output.
None severity=5 Log messages with severity level 5 are sent
to the specified output.
Table 12. Syslog Facility
Facility
Code
Facility
Keyword
Description
0 kernel Kernel messages
1 user User-level messages
2 mail Mail system
3 daemon System daemon
4 auth Security/authorization messages
To Next Page
Loading...
