Chapter 7: SNMP Commands
138 Section II: Switch Management
The fields are described in Table 15.
Table 15. SHOW SNMP Command
Field Description
Status Displays SNMP is Enabled or Disabled.
SNMP Manager Listen
Port
Displays the UDP port for SNMP.
SNMP TRAP Listen Port Displays the UDP port for SNMP Trap.
inPkts Displays the number of received SNMP packets.
inBadVersions Displays the number of received SNMP packets with
the version which is not supported.
inBadCommunityNames Displays the number of received SNMP packets
including a community name that was not
recognized.
inBadCommunityUses Displays the number of received SNMP packets that
a community has no permission to.
inASNParseErrs Displays the number of received SNMP packets that
were not able to be decoded due to the ASN.1
syntax error.
inTooBigs N/A
inNoSuchNames N/A
inBadValue N/A
inReadOnlys N/A
inGenErrs N/A
inTotalReqVars Displays the number of MIB objects that the SNMP
agent referred to in order to respond to GetRequest
and GetNextRequest messages.
inTotalSetVars Displays the number of MIB objects that were
changed by SetRequest messages.
inGetRequests Displasy the number of received GetRequest
messages.
inGetNexts Displays the number of received GetNextRequest
messages.
inSetRequests Displays the number of received SetRequest
messages.
inGetResponses N/A
To Next Page
Loading...
