Allied Telesis AT-GS900M Series - Page 141

AT-GS900M Series CLI Reference
Section II: Switch Management 141
The fields are described in Table 16.
Example
The following example displays a list of communities and their settings:
Manager > show snmp community
The following example displays the information about the community
private:
Manager > show snmp community=private
Table 16. SHOW SNMP COMMUNITY Command
Field Description
Name Displays the name of a community
Access Displays the access permission to the community.
The options are:
 read-only
 read-write
Status Displays whether the community is enabled or
disabled.
Trap Status Displays the trap is enabled or disabled.
Open Access Displays the open access setting of the community.
The options are:
 Yes - SNMP agent responds SNMP requests
from all the hosts and manager.
 No - SNMP agent responds SNMP requests
only from the manager..
Traps Displays a list of trap types that are generated.
Manager Displays the IP address of the SNMP manager of the
community.
Trap Host Displays the IP address of hosts that the community
send SNMP traps to.