7. System Setup
7.8 Savi ng the setup
General
In this procedure, you will sav e all system setup parameters to non-volatile memory.
Prerequisite
• Ensure that you are familiar with the Save All function. For details on this me nu, please refer to chapter "Save All", page 66 .
Save all system setup parameters
Use the following steps to save all system setup parameters:
1. Select Save All from the Setup menu.
2. Wait a few seconds. W hen the param eters are saved you are returned to the Setup m enu.
R5905948 E2 12/12/2014
165
To Next Page
Loading...
