4. Hardware orientation
4.4 Du al Link DVI Input Card
General
The Dua l Link DVI input ca rd includes two DV I-I dual-link connec tors w hich can support a single or dual-link DVI v ideo s ignal.
Although the DVI-I connectors includes pins that support analog signals, the DVI card doesn’t support analog
signals. If you need to connect an analog signal to the E2, you need to employ an external A/D co nverter.
The figure below illustrates the Dual Link DV I input card’s rear panel c onnectors:
Image 4-6
Dual Link DVI Input Card Rear Panel
1 DVI-I dual-link c onnector — DVI 1 with an LED
that turns on green when a v alid s ync has been detected
2 DVI-I dual-link c onnector — DVI 2 with an L
ED that turns on green when a valid sync ha s been detected
Features
• Default slot(s): 5, 6
• Process u p to 2 signals independently
• 2x D VI-I dual-link connector
• Support for single or dual-link DVI video s ignal
• Each input c hannel includes an LED that turns green when a valid sync is detected.
R5905948 E2 12/12/2014
37
To Next Page
Loading...
Need help?
General
