5. Front Panel Menu orientation
5.1 Power-up initialization
Initialization
Ensure that your system is properly installed a nd cabled. Make sure the two A C Connector are properly connected to your facility’s
AC po wer source through the two supplied power cords. Locate the power button on the front panel and turn power O n. W hile the
system is initializing, the front-panel buttons light up one at a time, and the following message is displayed.
Image 5-1
System Initializatio n Message
After system initialization is complete, t he Status menu appears.
46 R5905948 E2 12/12/2014
To Next Page
Loading...
