3. General
3.6 Installation requirements
Environment conditions
Table below summarizes the ph ysical environment in which the E2 may be safely operated o r stored.
Environment Operating Non-Operating
Ambient Tempe rature 0°C (32°F) to 40°C (104°F) -10°C (14°F) to 60°C (140°F)
Air cleanliness Clean office environment (equivalent with cleanroom
standard ISO 1 4644-1 ISO Class 9)
n.a.
Humidity
5% to 85% R H Non-condensed 0% to 95% RH Non-Condens ed
Altitude
-60 (-197Ft) to 3000m (9843Ft) -60 (-197Ft) to 10000m (32810Ft)
CAUTION: Let the E2 acclimate to the ambient temp erature after unpacking. Ensure that the hu midity is w ithin
the specification. Neglecting t his may result in startup failure of the device.
E2 software package
This version of the E2 User’s Guide is based on software v ersion 01.00.00.
Verify that th e E2 is loaded with the latest software version available on the Barco web site
(URL:h
ttps://ww w.barco.com/). Refer to the chapter "Updatin g firmware", page 18 3 for more information
about the E2 upgrading software.
Event Master Control Software (EMI GUI)
The EM GUI software must be at least:
• Version 01.00.00
R5905948 E2 12/12/2014
23