baxter Starling - Appendix C - Accessories: Specifications & Technical Data; NIBP Module Errors (ADC, EEPROM, Busy)

C-12 Starling Monitor - User Guide
NIBP Module
ADC out of range.
 Service may be required. Contact Baxter Service Center:
email:
starling_rma@baxter.com
Tel (worldwide): +1 360-828-8685
EEPROM calibration data failure.
 If possible, perform calibration.
 Service may be required. Contact Baxter Service Center:
email:
starling_rma@baxter.com
Tel (worldwide): +1 360-828-8685
Error Measuring NIBP – Critical NIBP
module error.
 Service may be required. Contact Baxter Service Center:
email: starling_rma@baxter.com
Tel (worldwide): +1 360-828-8685
Device Busy – NIBP device is not
responding as it is in the middle of an
activity.
 Retry to obtain an NIBP reading.
 If this error persists, restart the unit and try again to obtain an
NIBP reading.
 If you still encounter the error message after restarting the unit, service may be
required. Contact Baxter Service Center:
email:
starling_rma@baxter.com
Tel (worldwide): +1 360-828-8685
Table C-3 NIBP Module - Error Code List and Definitions (continued)
Error Code Recommended Corrective Action