CAPINTEC, INC. CAPTUS
®
3000
Figure 8-13 Main Wipe Test Screen
4. To begin the measurements, click the
button or press Alt+C. Figure 8-15 Wipe
Test Measurement Screen will appear.
Note: If calibration has not been performed for the current day, you will be prompted
with the screen as shown in Figure 8-14. After the calibration is complete, the
program will return to Figure 8-15 Wipe Test Measurement Screen.
Figure 8-14
November 13 WIPE TESTS 8-13
To Next Page
Loading...
