TCD 2015
Speed control
W 05-07-01
© 06/2006 8191-001
2/6
6
z Unscrew screw (1).
z Remove impulse transmitter (2).
z Remove seals.
1
2
© 40711-0
z Visually inspect the components.
z Clean components.
z Clean sealing surfaces.
© 45879-1
Installing the impulse transmitter
z Turn the crankshaft with the turning gear evenly.
Through the installation opening of the
impulse transmitter, no bore (arrow) may
be visible on the flywheel.
© 45900-0
To Next Page
Loading...
