TCD 2015
Fuel system
W 07-04-01
© 06/2006 8217-001
2/8
6
z Loosen screws (1).
z Pull off cables (2).
1
2
© 45384-0
z Unscrew screws (1).
z Remove fuel injector pump(2).
Loosen screws evenly to avoid jamming
the injection pump.
Lay out components in the order in which
they should be installed.
Note cylinder assignment.
1
2
© 40805-0
z Pull out roller tappet (1).
Attention!
Do not damage the roller tappet!
Lay out components in the order in which
they should be installed.
Note cylinder assignment.
1
© 40806-0
To Next Page
Loading...
