114 Upgrade and Maintenance Manual
RX2520 M4
6.3.1.3 Concluding steps
Ê Install the second PSU, see section "Installing a PSU" on page 102.
Ê "Installing the crossbar" on page 66
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
Ê "Resuming BitLocker functionality" on page 89
6.3.2 Removing the power distribution board
6.3.2.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 48
Ê "Disconnecting the power cord" on page 49
Ê "Getting access to the component" on page 50
Ê "Removing the air duct" on page 61
Ê "Removing the crossbar" on page 65
Ê Remove the PSU from bay 2, see section "Removing a PSU" on page 104.
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
To Next Page
Loading...
Need help?
General