Fujitsu PRIMERGY RX2520 M4 - Replacing a ODD; Preliminary Steps; Removing the Defective ODD; Installing the New ODD

RX2520 M4 Upgrade and Maintenance Manual 287
Accessible drives
12.3.3 Replacing a ODD
12.3.3.1 Preliminary steps
Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or ODD before removing it from the server.
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 48
Ê "Disconnecting the power cord" on page 49
Ê "Getting access to the component" on page 50
Ê "Removing the fan holder" on page 63
Ê "Removing the front panel module" on page 324
12.3.3.2 Removing the defective ODD
Ê Remove the ODD, see section "Removing the ODD" on page 284.
12.3.3.3 Installing the new ODD
Ê Install the ODD, see section "Installing the ODD" on page 280.
12.3.3.4 Concluding steps
Ê "Installing the front panel module" on page 328
Ê "Installing the fan holder" on page 64
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
Ê "Resuming BitLocker functionality" on page 89
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver