RX2520 M4
Upgrade and Maintenance Manual 233
10 Main memory
Safety notes
V CAUTION!
●
Do not install unsupported third party memory modules. For more
information on supported memory modules, see section "Basic
information" on page 234. Doing so may cause electric shock, a fire,
or failures.
●
Memory modules remain hot after shutdown. Wait for components to
cool down before installing or removing memory modules to prevent
burns.
●
Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
●
If the memory module has not been correctly inserted, it may cause
a fire. Insert the memory module with attention.
●
Pressing out the securing clips on the memory module connector will
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
●
For more information, see chapter "Important information" on
page 33.
To Next Page
Loading...
Need help?
General