EasyManua.ls Logo

Fujitsu PRIMERGY RX2520 M4

Fujitsu PRIMERGY RX2520 M4
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
158 Upgrade and Maintenance Manual
RX2520 M4
Hard disk drive (HDD) and solid state drive (SSD)
(3) If applicable, OOB cable to connector "X11"
7.3.14.4 Installing additional PCIe SSD modules
Ê Remove the dummy locks, see section "Removing a 2.5-inch dummy
module" on page 132.
Ê Insert additional PCIe SSDs, see section "Installing a 2.5-inch HDD/SSD
module" on page 133.
I The PCIe SSDs are mounted in the same frames as the 2.5-inch
HDD/SSD modules.
7.3.14.5 Concluding steps
Ê "Installing the fan holder" on page 64
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
Ê "Resuming BitLocker functionality" on page 89

Table of Contents

Other manuals for Fujitsu PRIMERGY RX2520 M4

Related product manuals