370 Upgrade and Maintenance Manual
RX2520 M4
System board and components
Figure 261: Removing the M.2 SSD (B)
Ê Pull the M.2 SSD out of its slot.
Ê If no new M.2 SSD will be installed:
Ê Fasten the screw to the corresponding bolt (see circles in figure 257)
depending on the M.2 slot.
15.5.2.3 Concluding steps
Ê If applicable, "Installing an expansion card" on page 208
Ê "Installing the crossbar" on page 66
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
To Next Page
Loading...
Need help?
General